Beele / CSD offers a wide variety products and solutions to address virtually any type of pipe penetration application. You can review our different products below.
Product Suggestions for Pipes
SLIPSIL SEALING PLUGS & COLLARS
SLIPSIL Sealing Plugs are an ideal solution for the fire-safe, gas and / or watertight sealing of penetrations carrying single or multiple pipes. A better alternative to link-type seals, the SLIPSIL Plugs utilize a proprietary self-compression design, and have no bolts, nuts or metallic parts that will corrode, and that need to be re-tightened periodically.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
NOFIRNO SYSTEM
NOFIRNO is a revolutionary new penetration sealing system developed for the harshest marine, offshore and industrial environments. Applications are designed to seal any type of cable penetration, as well as any metallic, composite or plastic pipe penetration. The system can be used for single or multiple pipes, or any combination of pipes or cables through the same penetration.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
- Re-Enterable
DYNATITE PLUGS AND COLLARS
The DYNATITE system was developed for critical applications where a high degree of (instantaneous) tightness is required. The cutting-edge design of DYNATITE actually forces the system to get tighter as the pressure increases.
Features
- Fire Resistant
- Watertight
- High Pressure
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
SLIPSIL MPP MODULES
The SLIPSIL - MPP system is designed to provide a simple solution for both cable and pipe penetrations. The system can be used for transits carrying a variety of pipes/cables with different diameters. The SLIPSIL - MPP system is easy to specify, and installation is quick and easy.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
CSD SPLIT FRAMES
CSD Split Frame system was developed to address areas where the existing, leaking penetration seal cannot be removed. This cost-effective system is simple to use; simply place the sections of split frames around the existing cables or pipes, place a NOFIRNO® gasket between the frame and wall / floor, then attach the frames to the wall or floor.
Features
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
CSD MODULAR CAST-IN SLEEVE SYSTEM
The CSD Modular Cast-in Sleeve System was designed primarily for use with the SLIPSIL® Sealing Plugs. The ID’s of the sleeves correspond to the OD’s of the SLIPSIL® Sealing Plugs to ensure a watertight / gas-tight seal.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
GLANDMOD SYSTEM
The GLANDMOD System is an innovative alternative to glands and block-style cabinet seals for cable entries into cabinets and other OEM equipment. The modules are available in HMPE plastic or aluminum, and come in various configurations. The plugs are available in different sizes to accommodate cables or small pipes from 4mm up to 40mm.
Features
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- No Corrosion
- Long-Term Installation
- Easy Installation
NOFIRNO/AQUASTOP SYSTEM
The NOFIRNO® AQUASTOP® sealing system is a proprietary, state-of-the-art sealing system for existing pipe and cable penetrations that are experiencing water leakage. The system can be applied to wet surfaces, resulting in a long-term seal against further water ingress. The existing, leaking seal can either be removed or left in place when utilizing the NOFIRNO® AQUASTOP® system.
Features
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
FISSIC COATING
FISSIC Coating® is a new fire retardant coating, developed on the basis of an APEO free, water-based polymer emulsion without the addition of solvents that contain VOC’s. FISSIC is also designed to provide the utmost in corrosion protection to all types of metals.
Features
- Corrosion Resistant
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Long-Term Installation
- Wide Service Temp Range
ACTIFOAM SHEETS
ACTIFOAM® Temporary Seals for cable penetrations protect your installation while under construction or renovation. They help to prevent a fire from spreading if one starts during construction.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
FIRSTO SYSTEM
FIRSTO firestops are designed to seal multi-cable and cable tray penetrations of fire-rated walls and floors. FIRSTO fire stops are developed as a modular system which is simple to assemble around the cable run against the wall or on the floor.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Long-Term Installation
- Easy Installation
- Re-Enterable
CRUSHER SYSTEM
The CRUSHER System is designed to seal all types of plastic pipe penetrations. A simple application of a CRUSHER Sleeve and NOFIRNO Sealant provides the ultimate in fire, gas and watertight protection.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
CONTROFIL SYSTEM
The CONTROFIL® System is the newest innovation in cable penetration sealing systems. The proprietary rubber blocks are designed only as passage modules for cables (not compression devices), which ensure neat cable routing.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Wide Service Temp Range
- Easy Installation
NOFIRNO CABLE DUCT SEAL SYSTEM
The NOFIRNO® Duct Seal System is the proven choice for watertight and gas-tight protection for cable ducts, manhole entries, duct bank entries, and similar applications where cables exit ducts or core-drill holes. This system is used extensively in the utility industry worldwide to protect critical applications in substations and other areas where water and gas ingress must be prevented.
Features
- Fire Resistant
- Watertight
- Gas-Tight
- Smoke Tight
- Rodent Proof
- Sound Dampening
- No Corrosion
- Long-Term Installation
- Re-Enterable
- Easy Installation
- Wide Service Temp Range